MAX6362LUT31+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Strip |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET INPUT, WATCHDOG INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 696mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.38V |
| Terminal Pitch | 0.95mm |
| Output | Push-Pull, Totem Pole |
| Pin Count | 6 |
| Power Supplies | 2.5/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 15μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 3.08V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Supply Current-Max (Isup) | 0.05mA |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.15V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.15V |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6362LUT31+T Overview
This power management consists of 6 mounting terminals on which it can be mounted. In terms of packaging, power management follows the Strip model. In this PMIC, you can find 1 functions for your reference. This power management is made up of 2 channels which are available in a series format. In this PMIC, you can find SOT-23-6 functions for your reference. There are a lot of similarities between this IC management and other Battery Backup Circuit products. As specified in the package specification, the peak reflow temperature of the package is set at 260. During operation, the power ic is supplied with a voltage of 2.38V. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount mounts power management on the wall. It is possible to subcategorize this power ic as a Power Management Circuits chip. The total number of pins on this power management is 6. This power management has 6 pins. A voltage (Vsup) that doesn't fall below 0V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. For this power management, there is an 15μA volt supply current. As well as this, there are other features to mention such as [0], for example. It requires 2.5/5V watts of power to operate this voltage supervisor.
MAX6362LUT31+T Features
Battery Backup Circuit type
Minimum supply voltage of 0V
15μA operating supply current
MAX6362LUT31+T Applications
There are a lot of Maxim Integrated MAX6362LUT31+T Voltage Supervisors applications.
- Electrical fire monitoring system
- Multi-voltage system
- Medical-specific isolation transformer
- Smart meter
- Fire equipment power monitoring system
- Low voltage/high power - AI, GPU
- Important electronics for automotive protection
- Personal computers
- Refrigeration
- DC stabilized power supply module
