MAX6364LUT26+T
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.38V |
| Terminal Pitch | 0.95mm |
| Output | Push-Pull, Totem Pole |
| Pin Count | 6 |
| Power Supplies | 2.5/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 15μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Supply Current-Max (Isup) | 0.05mA |
| Min Reset Threshold Voltage | 2.55V |
| Max Reset Threshold Voltage | 2.7V |
| Undervoltage Threshold | 2.55V |
| Overvoltage Threshold | 2.7V |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Strip |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET INPUT, WATCHDOG INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 696mW |
| Technology | BICMOS |
MAX6364LUT26+T Overview
There are 6 terminals on this power management that allow it to be mounted. Packaged in a Strip-shape, IC management comes with a number of features. As a reference, this IC management includes 1 functions for your convenience. There are 2 channels on this power managment ic that can be found in a series. There are SOT-23-6 functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Battery Backup Circuit products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. The supervisor is always powered by a 2.38V volt supply. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. It is possible to subcategorize this power ic as a Power Management Circuits chip. A total of 6 pins are located on this power management. Power managment ic pin count is 6. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 0V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Surface MountIt is recommended that the supervisor be set to this temperature: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. For this power management, there is an 15μA volt supply current. The other features include, for example, [0], which is just one example. The voltage supervisor requires a power source of 2.5/5V volts in order to work correctly.
MAX6364LUT26+T Features
Battery Backup Circuit type
Minimum supply voltage of 0V
15μA operating supply current
MAX6364LUT26+T Applications
There are a lot of Maxim Integrated MAX6364LUT26+T Voltage Supervisors applications.
- Fire equipment power monitoring system
- Analog circuit
- Detection of phase sequence
- Automotive permanent magnet synchronous motors
- Power distribution systems of infant care room
- Efficient information transmission
- Transformer load monitoring equipment
- Electric heating appliances
- Automotive power systems
- Household appliances
