banner_page

MAX6364LUT31+T

2.38V6 Terminals 6-Pin MAX6364 Voltage supervisor2 Channels Min 0V Max 5.5V


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX6364LUT31+T
  • Package: SOT-23-6
  • Datasheet: PDF
  • Stock: 578
  • Description: 2.38V6 Terminals 6-Pin MAX6364 Voltage supervisor2 Channels Min 0V Max 5.5V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SOT-23-6
Number of Pins 6
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2011
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
ECCN Code EAR99
Type Battery Backup Circuit
Terminal Finish Matte Tin (Sn)
Additional Feature MANUAL RESET INPUT, WATCHDOG INPUT
Subcategory Power Management Circuits
Max Power Dissipation 696mW
Technology BICMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.38V
Terminal Pitch 0.95mm
Base Part Number MAX6364
Output Push-Pull, Totem Pole
Pin Count 6
Power Supplies 2.5/5V
Number of Channels 2
Max Supply Voltage 5.5V
Min Supply Voltage 0V
Operating Supply Current 15μA
Adjustable Threshold NO
Watchdog Timer No
Reset Active Low
Voltage - Threshold 3.08V
Number of Voltages Monitored 1
Reset Timeout 150ms Minimum
Supply Current-Max (Isup) 0.05mA
Min Reset Threshold Voltage 3V
Max Reset Threshold Voltage 3.15V
Undervoltage Threshold 3V
Overvoltage Threshold 3.15V
Height 1.3mm
Length 3mm
Width 1.75mm
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MAX6364LUT31+T Overview


There are 6 terminals on this power management that allow it to be mounted. A Tape & Reel (TR) package is used to package the power management. For your reference, this IC power includes a list of 1 functions. A series of 2 channels can be found on this supervisor. As a reference, this IC power includes SOT-23-6 functions for your convenience. Several of the benefits of this PMIC are also shared by other Battery Backup Circuit products. According to the specification, the package's peak reflow temperature is specified to be 260. When a supply voltage of 2.38V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. The mount is provided by Surface Mount. The power management belongs to the Power Management Circuits subcategory. In total, the power management has 6 pins in it. Pin count of the power management is 6. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 0V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type for IC management is Surface Mount. This range of temperature should be set for the supervisors: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. Supplied with a operating current of 15μA, this PMIC is capable of fully function as specified. Additionally, IC management are a variety of features, for example [0], to name a few. It is always advisable to use MAX6364, the base supervisor number, when searching for similar PMICs from the manufacturer. To operate this power management, you will need at least 2.5/5V volts of power.

MAX6364LUT31+T Features


Battery Backup Circuit type
Minimum supply voltage of 0V
15μA operating supply current

MAX6364LUT31+T Applications


There are a lot of Maxim Integrated MAX6364LUT31+T Voltage Supervisors applications.

  • Rechargeable batteries
  • Insulation fault location system
  • Magnetic resonance imaging
  • WiFi router
  • Multi-voltage system
  • Network equipment
  • Smartphones
  • Digitally controlled LDO regulators circuit
  • Detection of phase imbalance
  • Detection of phase loss

Write a review

Note: HTML is not translated!
    Bad           Good