MAX6364PUT26-T
| Parameters | |
|---|---|
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 15μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Supply Current-Max (Isup) | 0.05mA |
| Min Reset Threshold Voltage | 2.55V |
| Max Reset Threshold Voltage | 2.7V |
| Undervoltage Threshold | 2.55V |
| Overvoltage Threshold | 2.7V |
| Length | 2.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Additional Feature | MANUAL RESET INPUT, WATCHDOG INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 696mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 2.38V |
| Terminal Pitch | 0.95mm |
| Base Part Number | MAX6364 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Power Supplies | 2.5/5V |
MAX6364PUT26-T Overview
As you can see, this power management is mounted through 6 terminals. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 2 channels that can be found. In this PMIC, you can find SOT-23-6 functions for your reference. It is a IC power that shares many benefits with other products from the Battery Backup Circuit line. Packages are specified to have an average peak reflow temperature of 245. During operation, the power ic is supplied with a voltage of 2.38V. Power ics operate at 1 supply voltages. The power management is mounted by Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. In total, IC powers are 6 pins on the board. Pin count of the power management is 6. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 0V volts. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. It is estimated that the voltage supervisor's supply current is 15μA. Supervisors are also additional features, such as [0] for example, which are worth mentioning. It is always advisable to use MAX6364, the base supervisor number, when searching for similar PMICs from the manufacturer. The power management must be powered by 2.5/5V volts to function properly.
MAX6364PUT26-T Features
Battery Backup Circuit type
Minimum supply voltage of 0V
15μA operating supply current
MAX6364PUT26-T Applications
There are a lot of Maxim Integrated MAX6364PUT26-T Voltage Supervisors applications.
- DC stabilized power supply module
- Battery cars
- Stable power system
- Radio
- Detection of phase loss
- Network equipment
- emergency room
- Detection of phase sequence
- Dash board
- Power distribution systems of ICU
