MAX6366HKA29+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WATCH DOG TIMER |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 700mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX6366 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 2.5/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 15μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High |
| Voltage - Threshold | 2.93V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Supply Current-Max (Isup) | 0.05mA |
| Min Reset Threshold Voltage | 2.85V |
| Max Reset Threshold Voltage | 3V |
| Undervoltage Threshold | 2.85V |
| Overvoltage Threshold | 3V |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6366HKA29+T Overview
As you can see, this power management is mounted through 8 terminals. A Tape & Reel (TR) package is used to package the power management. Power management is possible to find a series of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 2 channels. In this IC management you will find SOT-23-8 functions for you to refer to. There are a lot of similarities between this IC management and other Battery Backup Circuit products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. In a 2.8V supply voltage, the power management conducts. In a 1 supply voltage, the PMIC chip conducts. The power management is mounted by Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. Power management has a total of 8 pins. 8 pins are present on the power management system. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 0V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. The supervisor's supply current is specified to 15μA. Power management is also possible to add other features such as WATCH DOG TIMER to name a few. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6366, which is the base power ics number. It is necessary to have 2.5/5V volts of power in order for this voltage supervisor to operate.
MAX6366HKA29+T Features
Battery Backup Circuit type
Minimum supply voltage of 0V
15μA operating supply current
MAX6366HKA29+T Applications
There are a lot of Maxim Integrated MAX6366HKA29+T Voltage Supervisors applications.
- Functional modules
- Digitally controlled LDO regulators circuit
- Data storage applications
- Network equipment
- Smartphones
- Power distribution systems of CCU
- Refrigeration
- Display equipment
- Electrical fire monitoring system
- Stable power system
