banner_page

MAX6366LKA46+T

2.8V8 Terminals 8-Pin Voltage supervisor2 Channels Min 0V Max 5.5V


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX6366LKA46+T
  • Package: SOT-23-8
  • Datasheet: PDF
  • Stock: 582
  • Description: 2.8V8 Terminals 8-Pin Voltage supervisor2 Channels Min 0V Max 5.5V (Kg)

Details

Tags

Parameters
Published 2011
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Battery Backup Circuit
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature WATCH DOG TIMER
Subcategory Power Management Circuits
Max Power Dissipation 700mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.8V
Terminal Pitch 0.65mm
Output Push-Pull, Totem Pole
Pin Count 8
Power Supplies 2.5/5V
Number of Channels 2
Max Supply Voltage 5.5V
Min Supply Voltage 0V
Operating Supply Current 15μA
Adjustable Threshold NO
Watchdog Timer Yes
Reset Active Low
Voltage - Threshold 4.63V
Number of Voltages Monitored 1
Reset Timeout 150ms Minimum
Supply Current-Max (Isup) 0.05mA
Min Reset Threshold Voltage 4.5V
Max Reset Threshold Voltage 4.75V
Undervoltage Threshold 4.5V
Overvoltage Threshold 4.75V
Length 2.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SOT-23-8
Number of Pins 8
Operating Temperature -40°C~85°C TA
Packaging Strip

MAX6366LKA46+T Overview


A total of 8 terminals are used to mount this power management. It is packaged with Strip. There are 1 functions included in this PMIC so that you can refer to them. There are a total of 2 channels on this supervisor, and they are arranged in a series. Please find attached SOT-23-8 functions for your reference in this IC power. There are many benefits that this IC power shares with other Battery Backup Circuit products as well. Packages are specified to have an average peak reflow temperature of 260. There is a voltage supply of 2.8V for the PMIC chip, and the chip conducts at that voltage. IC management is possible to find a succession of 1 voltages that have been checked. Power management is included in the Surface Mount mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, it has 8 pins on IC management. 8 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 0V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. It is estimated that the voltage supervisor's supply current is 15μA. The other features include, for example, [0], which is just one example. The voltage supervisor requires a power source of 2.5/5V volts in order to work correctly.

MAX6366LKA46+T Features


Battery Backup Circuit type
Minimum supply voltage of 0V
15μA operating supply current

MAX6366LKA46+T Applications


There are a lot of Maxim Integrated MAX6366LKA46+T Voltage Supervisors applications.

  • Computer applications
  • Automotive permanent magnet synchronous motors
  • Fire equipment power monitoring system
  • Household appliances
  • Sensitive sensors
  • External alarm
  • Important electronics for automotive safety
  • Magnetic resonance imaging
  • FPGA design
  • Digitally controlled LDO regulators circuit

Write a review

Note: HTML is not translated!
    Bad           Good