MAX6366PKA23+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WATCH DOG TIMER |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 700mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX6366 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 2.5/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 15μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.32V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Supply Current-Max (Isup) | 0.05mA |
| Min Reset Threshold Voltage | 2.25V |
| Max Reset Threshold Voltage | 2.38V |
| Undervoltage Threshold | 2.25V |
| Overvoltage Threshold | 2.38V |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6366PKA23+T Overview
This power management consists of 8 mounting terminals on which it can be mounted. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. In this IC power you will find 1 functions for you to refer to. There are 2 channels on this power managment ic that can be found in a series. There are SOT-23-8 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Battery Backup Circuit products. Packages are specified to have an average peak reflow temperature of 260. A supply voltage of 2.8V is used to conduct the PMIC chip. When 1 is applied to the power ic, it conducts. Surface Mount is the one that mounts power management. There is a subcategory of this power ic known as Power Management Circuits. It has a total of 8 pins that are attached to IC management. Pin count of the power management is 8. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 0V. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. It is estimated that the voltage supervisor's supply current is 15μA. Additionally, there are many other features that can be found inside of the power management, such as [0]. It is always advisable to use MAX6366, the base supervisor number, when searching for similar PMICs from the manufacturer. It requires 2.5/5V watts of power to operate this voltage supervisor.
MAX6366PKA23+T Features
Battery Backup Circuit type
Minimum supply voltage of 0V
15μA operating supply current
MAX6366PKA23+T Applications
There are a lot of Maxim Integrated MAX6366PKA23+T Voltage Supervisors applications.
- Smartphones
- Consumer electronics
- Radar
- Important electronics for automotive protection
- Leakage current detection
- Linux and server computing
- Detection of phase loss
- Medical-specific insulation monitor
- Set top box
- Multi-voltage system
