MAX6367HKA31+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BATTERY-ON OUTPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 700mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX6367 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 2.5/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 15μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 3.08V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Supply Current-Max (Isup) | 0.05mA |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.15V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.15V |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6367HKA31+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. In terms of packaging, power management follows the Tape & Reel (TR) model. Power management is possible to find a series of 1 functions. It is possible to find on this power management a series of 2 channels. IC management is packaged as a SOT-23-8 package. It is a IC power that shares many benefits with other products from the Battery Backup Circuit line. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 2.8V supply voltages. In a 1 supply voltage, the PMIC chip conducts. The power management is mounted by a Surface Mount-axis. The power management system can be categorized as a Power Management Circuits chip. There are a total of 8 pins on power management. The pins of the power management system count 8. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 0V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. In this case, Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. In order to maintain a stable supply current for the power management, 15μA is the recommended value. As well as this, there are other features to mention such as [0], for example. For similar manage ics search of the manufacturer, you can always refer to MAX6367, the base PMIC number. To operate this power management, you will need at least 2.5/5V volts of power.
MAX6367HKA31+T Features
Battery Backup Circuit type
Minimum supply voltage of 0V
15μA operating supply current
MAX6367HKA31+T Applications
There are a lot of Maxim Integrated MAX6367HKA31+T Voltage Supervisors applications.
- Refrigeration
- Smart meter
- emergency room
- Detection of phase imbalance
- Set top box
- Functional modules
- Power distribution systems of ICU
- Rechargeable batteries
- Digitally controlled LDO regulators circuit
- Computer applications
