MAX6367PKA31+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Strip |
| Published | 2011 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BATTERY-ON OUTPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 700mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 2.5/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 15μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.08V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Supply Current-Max (Isup) | 0.05mA |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.15V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.15V |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6367PKA31+T Overview
It is mounted through 8 terminals on the power management. A Strip package is used to package the power management. For your reference, this IC power includes a list of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 2 channels. The purpose of this IC power is to provide you with a reference of SOT-23-8 functions. With power management, you get a lot of benefits that you won't find in other Battery Backup Circuit products. IC management is specified that the package peak reflow temperature should be 260. When a supply voltage of 2.8V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. Surface Mount mounts power management on the wall. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, the power management has 8 pins in it. 8 pins make up the power management. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 0V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. Supplied with a operating current of 15μA, this PMIC is capable of fully function as specified. Additionally, IC management are a variety of features, for example [0], to name a few. It requires 2.5/5V watts of power to operate this voltage supervisor.
MAX6367PKA31+T Features
Battery Backup Circuit type
Minimum supply voltage of 0V
15μA operating supply current
MAX6367PKA31+T Applications
There are a lot of Maxim Integrated MAX6367PKA31+T Voltage Supervisors applications.
- Power distribution systems of operating room
- Low voltage/high power - AI, GPU
- Electric heating appliances
- Set top box
- Battery cars
- Stable power system
- Efficient information transmission
- Military communications
- Digitally controlled LDO regulators circuit
- Personal computers
