banner_page

MAX6368LKA26+T

2.8V8 Terminals 8-Pin Voltage supervisor2 Channels Min 0V Max 5.5V


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX6368LKA26+T
  • Package: SOT-23-8
  • Datasheet: PDF
  • Stock: 957
  • Description: 2.8V8 Terminals 8-Pin Voltage supervisor2 Channels Min 0V Max 5.5V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SOT-23-8
Number of Pins 8
Operating Temperature -40°C~85°C TA
Packaging Strip
Published 2011
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Battery Backup Circuit
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature AUXILIARY USER-ADJUSTABLE RESET IN
Subcategory Power Management Circuits
Max Power Dissipation 700mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.8V
Terminal Pitch 0.65mm
Output Push-Pull, Totem Pole
Pin Count 8
Power Supplies 2.5/5V
Number of Channels 2
Max Supply Voltage 5.5V
Min Supply Voltage 0V
Operating Supply Current 15μA
Adjustable Threshold YES
Watchdog Timer No
Reset Active Low
Voltage - Threshold 2.63V
Number of Voltages Monitored 1
Reset Timeout 150ms Minimum
Supply Current-Max (Isup) 0.05mA
Length 2.9mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MAX6368LKA26+T Overview


This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Packaged in the form of a Strip, power management is easy to use. Power management is possible to find a series of 1 functions. This power management is made up of 2 channels which are available in a series format. To assist you, this PMIC includes SOT-23-8 functions. This IC power shares lots of benefits with other Battery Backup Circuit products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts at a voltage of 2.8V. Power management conducts at a voltage of 1. The power management is mounted by Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. A total of 8 pins are located on this power management. 8 pins are present on the power management system. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 0V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The recommended mounting type is Surface Mount. This range of temperature should be set for the supervisors: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 15μA. Supervisors are also additional features, such as [0] for example, which are worth mentioning. The power management must be powered by 2.5/5V volts to function properly.

MAX6368LKA26+T Features


Battery Backup Circuit type
Minimum supply voltage of 0V
15μA operating supply current

MAX6368LKA26+T Applications


There are a lot of Maxim Integrated MAX6368LKA26+T Voltage Supervisors applications.

  • Electric heating appliances
  • Battery cars
  • Low voltage/high power - AI, GPU
  • Electronics installed in the vehicle
  • Power distribution systems of CCU
  • Medical-specific insulation monitor
  • Power communication system
  • Unattended substation automation
  • Dash board
  • Transformer load monitoring equipment

Write a review

Note: HTML is not translated!
    Bad           Good