MAX6373KA-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Watchdog Circuit |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Analog Waveform Generation Functions |
| Max Power Dissipation | 700mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Frequency | 33kHz |
| Base Part Number | MAX6373 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 10μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | Adjustable/Selectable |
| Height | 1.3mm |
| Length | 3mm |
| Width | 1.75mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX6373KA-T Overview
Power management is mounted through 8 terminals. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. As a reference, this IC power includes SOT-23-8 functions for your convenience. Several of the benefits of this PMIC are also shared by other Watchdog Circuit products. Specifies a reflow peak temperature of 245 for the package during reflow. When a supply voltage of 3V is applied to the power ic, it conducts. IC management is possible to find a succession of 1 voltages that have been checked. Using Surface Mount, IC management is mounted. The power management belongs to the Analog Waveform Generation Functions subcategory. 8 pins are present in total in this power management. 8 pins make up the power management. A voltage (Vsup) that doesn't fall below 2.5V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The temperature of the supervisors should be set to this range: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. Supplied with a operating current of 10μA, this PMIC is capable of fully function as specified. To find similar IC managements from the manufacturer, you can always search by MAX6373. There is a requirement for 3/5V power to power this power management. As a rule of thumb, voltage supervisor will work well in most cases with a frequency of 33kHz.
MAX6373KA-T Features
Watchdog Circuit type
Minimum supply voltage of 2.5V
10μA operating supply current
MAX6373KA-T Applications
There are a lot of Maxim Integrated MAX6373KA-T Voltage Supervisors applications.
- Display equipment
- Computer applications
- Microcontroller system
- Electrical fire monitoring system
- Dash board
- Kitchen appliances
- Efficient information transmission
- FPGA design
- Urban rail transit weak current power monitoring
- Solar power charger
