MAX6378XR44+T
| Parameters | |
|---|---|
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-70, SOT-323 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Strip |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 174mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 1μA |
| Adjustable Threshold | NO |
| Accuracy | 2.5 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.38V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 20μs Typical Propagation Delay |
| Min Reset Threshold Voltage | 4.314V |
| Max Reset Threshold Voltage | 4.446V |
| Threshold Voltage | +4.38V |
| Undervoltage Threshold | 4.314V |
| Overvoltage Threshold | 4.446V |
MAX6378XR44+T Overview
There are 3 terminals on this power management that allow it to be mounted. Power management is packaged in a Strip way. As a reference, this IC management includes 1 functions for your convenience. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of SC-70, SOT-323 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. Manage ics operate at 3V supply voltages. IC management is possible to find a succession of 1 voltages that have been checked. The mount is attached to Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. 3 pins are present in total in this power management. The pins of the power management system count 3. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. In this case, Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. Supplied with a operating current of 1μA, this PMIC is capable of fully function as specified.
MAX6378XR44+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1μA operating supply current
MAX6378XR44+T Applications
There are a lot of Maxim Integrated MAX6378XR44+T Voltage Supervisors applications.
- Power distribution systems of infant care room
- WiFi router
- Display equipment
- Leakage protection
- Transformer load monitoring equipment
- Linux and server computing
- Refrigeration
- Important electronics for automotive protection
- Detection of phase sequence
- Radio
