MAX6379XR46+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-70, SOT-323 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Strip |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 174mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 1μA |
| Adjustable Threshold | NO |
| Accuracy | 2.5 % |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 4.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 20μs Typical Propagation Delay |
| Min Reset Threshold Voltage | 4.56V |
| Max Reset Threshold Voltage | 4.699V |
| Threshold Voltage | +4.63V |
| Undervoltage Threshold | 4.56V |
| Overvoltage Threshold | 4.699V |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6379XR46+T Overview
It is mounted through 3 terminals on the power management. This power ic is packaged in a way that looks like a Strip. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of SC-70, SOT-323 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 3V volt supply. IC management is possible to find a succession of 1 voltages that have been checked. Power management is included in the Surface Mount mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. 3 pins are present in total in this power management. This power management system has 3 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Mounting type Surface Mount is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. There is a 1μA supply current present in the power management.
MAX6379XR46+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1μA operating supply current
MAX6379XR46+T Applications
There are a lot of Maxim Integrated MAX6379XR46+T Voltage Supervisors applications.
- Set top box
- Leakage protection
- Battery cars
- Electronics installed in the vehicle
- Important electronics for automotive safety
- DVR
- WiFi router
- Stable power system
- Detection of phase imbalance
- Medical-specific insulation monitor
