MAX6387LT46D4+T
| Parameters | |
|---|---|
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.63V Adj |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 1.12s Minimum |
| Supply Current-Max (Isup) | 0.013mA |
| Undervoltage Threshold | 4.51V |
| Overvoltage Threshold | 4.74V |
| Height Seated (Max) | 0.8mm |
| Length | 1.5mm |
| Width | 1mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-WFDFN |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 167.7mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MAX6387 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 6 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 7μA |
| Adjustable Threshold | NO |
MAX6387LT46D4+T Overview
As you can see, this power management is mounted through 6 terminals. Power management is packaged in a Tape & Reel (TR) way. In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 1 channels that can be found. There are 6-WFDFN functions included in this PMIC so that you can refer to them. With power management, you get a lot of benefits that you won't find in other Multi-Voltage Supervisor products. According to the specification, the package's peak reflow temperature is specified to be 260. There is a voltage supply of 1.8V for the PMIC chip, and the chip conducts at that voltage. IC management conducts in a 2-voltage supply. Power management is included in the Surface Mount mount. The power management system can be categorized as a Power Management Circuits chip. The total number of pins on this power management is 6. This power management has 6 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type is Surface Mount. This range of temperature should be set for the supervisors: -40°C~125°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. For this power management, there is an 7μA volt supply current. A similar IC managements number of the manufacturer can always be found by using MAX6387, the base power ics number.
MAX6387LT46D4+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
7μA operating supply current
MAX6387LT46D4+T Applications
There are a lot of Maxim Integrated MAX6387LT46D4+T Voltage Supervisors applications.
- DVR
- Digitally controlled LDO regulators circuit
- DSP
- Data storage applications
- Battery cars
- Detection of phase loss
- Smart meter
- Computer applications
- Medical-specific insulation monitor
- Automotive power systems
