MAX6392KA46+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | TIN |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4.63V; MANUAL RESET INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 421mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX6392 |
| Output | Open Drain, Push-Pull |
| Pin Count | 8 |
| Power Supplies | 1.5/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 15μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.63V Adj |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 140ms/Adjustable Minimum |
| Threshold Voltage | +4.63V |
| Undervoltage Threshold | 610mV |
| Overvoltage Threshold | 4.75V |
| Height Seated (Max) | 1.45mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6392KA46+T Overview
A total of 8 terminals are used to mount this power management. There is a Tape & Reel (TR)-packaging method applied to IC management. For your reference, this IC power includes a list of 1 functions. There are 2 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of SOT-23-8 functions. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. Manage ics operate at 5V supply voltages. In a 2 supply voltage, the PMIC chip conducts. Surface Mount is the one that mounts power management. This power ic can be sub-categorized as Power Management Circuits. It has a total of 8 pins that are attached to IC management. 8 pins are present on the power management system. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. While this power management is operating, it will output Open Drain, Push-Pull as the output voltage. Supplied with a operating current of 15μA, this PMIC is capable of fully function as specified. Additionally, IC management are a variety of features, for example [0], to name a few. A similar IC managements number of the manufacturer can always be found by using MAX6392, the base power ics number. A power supply of 1.5/5V watts is required for the operation of this power management.
MAX6392KA46+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
15μA operating supply current
MAX6392KA46+T Applications
There are a lot of Maxim Integrated MAX6392KA46+T Voltage Supervisors applications.
- Magnetic resonance imaging
- Electronics installed in the vehicle
- Dash board
- Household appliances
- emergency room
- Kitchen appliances
- Satellite navigation
- Detection of phase sequence
- Automotive power systems
- Automotive permanent magnet synchronous motors
