MAX6397SATA+T
| Parameters | |
|---|---|
| Operating Supply Current | 118μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.892V |
| Number of Voltages Monitored | 1 |
| Nominal Input Voltage | 72V |
| Min Reset Threshold Voltage | 1.181V |
| Max Reset Threshold Voltage | 1.248V |
| Undervoltage Threshold | 1.181V |
| Overvoltage Threshold | 1.248V |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Regulator/Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 3.3V |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 1.455W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX6397 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Working Voltage | 72V |
| Number of Channels | 1 |
| Max Supply Voltage | 72V |
| Min Supply Voltage | 5.5V |
MAX6397SATA+T Overview
There are 8 terminals connected to this power management, which makes it easy to mount. In terms of packaging, power management follows the Tape & Reel (TR) model. Please refer to this PMIC for 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. As a reference, this IC power includes 8-WDFN Exposed Pad functions for your convenience. There are many benefits that this IC power shares with other Regulator/Supervisor products as well. The package peak reflow temperature is specified to be 260. Manage ics operate at 14V supply voltages. Power management conducts at a voltage of 1. Using Surface Mount, IC management is mounted. There is a subcategory of this power ic known as Power Management Circuits. In total, IC powers are 8 pins on the board. There are 8 pins on the power managment ic. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 5.5V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) in this PMIC should not exceed 72V volts. The recommended mounting type for IC management is Surface Mount. This range of temperature should be set for the supervisors: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. There is a supply current of 118μA for the power management. There are also other features in the software such as [0], just to mention a few. For similar manage ics search of the manufacturer, you can always refer to MAX6397, the base PMIC number.
MAX6397SATA+T Features
Regulator/Supervisor type
Minimum supply voltage of 5.5V
118μA operating supply current
MAX6397SATA+T Applications
There are a lot of Maxim Integrated MAX6397SATA+T Voltage Supervisors applications.
- Dash board
- Detection of phase imbalance
- Battery cars
- Satellite navigation
- Important electronics for automotive protection
- Efficient information transmission
- Insulation fault location system
- Utility meter
- DC stabilized power supply module
- Transformer load monitoring equipment
