banner_page

MAX6424UK44+T

5V5 Terminals 5-Pin Voltage supervisor1 Channels Min 1V Max 5.5V


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX6424UK44+T
  • Package: SOT-23
  • Datasheet: PDF
  • Stock: 266
  • Description: 5V5 Terminals 5-Pin Voltage supervisor1 Channels Min 1V Max 5.5V (Kg)

Details

Tags

Parameters
Watchdog Timer No
Reset Active Low
Number of Voltages Monitored 1
Supply Current-Max (Isup) 0.0042mA
Min Reset Threshold Voltage 4.266V
Max Reset Threshold Voltage 4.484V
Threshold Voltage 4.375V
Undervoltage Threshold 4.266V
Overvoltage Threshold 4.484V
Length 2.9mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Mount Surface Mount
Package / Case SOT-23
Number of Pins 5
Packaging Strip
Published 2006
JESD-609 Code e3
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 5
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish TIN
Max Operating Temperature 125°C
Min Operating Temperature -40°C
Subcategory Power Management Circuits
Max Power Dissipation 571mW
Technology BICMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Pin Count 5
Temperature Grade AUTOMOTIVE
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 1V
Operating Supply Current 2.5μA
Adjustable Threshold NO

MAX6424UK44+T Overview


Power management is mounted through 5 terminals. Strip-packaging is used. There are 1 functions included in this PMIC so that you can refer to them. Depending on the power managment ic you are looking at, you can find a total of 1 channels. For your reference, this PMIC includes a list of SOT-23 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. The supervisor is always powered by a 5V volt supply. IC management conducts in a 1-voltage supply. The power management is mounted by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. The total number of pins on this power management is 5. There are 5 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. There is a 2.5μA supply current present in the power management.

MAX6424UK44+T Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
2.5μA operating supply current

MAX6424UK44+T Applications


There are a lot of Maxim Integrated MAX6424UK44+T Voltage Supervisors applications.

  • Detection of phase imbalance
  • Microprocessor system
  • Solar power charger
  • Smart meter
  • Kitchen appliances
  • Battery cars
  • Important electronics for automotive protection
  • WiFi router
  • Detection of phase sequence
  • Automotive power systems

Write a review

Note: HTML is not translated!
    Bad           Good