MAX642ACPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 930.006106mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX642 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Efficiency | 80 % |
| Output Voltage | 12V |
| Output Type | Adjustable (Fixed) |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 16.5V |
| Voltage - Input (Min) | 2V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 450mA Switch |
| Voltage - Output (Min/Fixed) | 1.31V 12V |
| Topology | Boost |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 50kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 2mA |
| Synchronous Rectifier | No |
| Voltage - Output (Max) | 18V Switch |
| Max Output Power | 10W |
| Nominal Output Voltage | 12V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.87mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX642ACPA+ Overview
As a result of the use of the Tube package, the performance of this voltage regulator is optimized. In this voltage regulator, there are a total of 8 terminations. The type of analog IC that this voltage regulator is equipped with is SWITCHING REGULATOR. The harley voltage regulator is available as a 8-DIP (0.300, 7.62mm) package to save space. 1 outputs of voltage regulator are configured. On the output pins of this DC DC switching regulator, there is a Adjustable (Fixed) output generated. A Through Hole mounting is required for this switching regulator. The operating temperature should be kept at 0°C~70°C TA when the voltage regulator 12v is in operation. This DC-DC switching regulator has a switching frequency of 50kHz. Input voltage 2V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. As a result, the output voltage of the voltage regulator 12v (Min/Fixed) is 1.31V 12V. A maximum design flexibility is provided by the 450mA Switch output current of voltage regulator. 260 is essentially indestructible due to DC DC switching regulator's peak reflow temperature. The regulator voltage that you are looking at belongs to the subcategory Switching Regulator or Controllers. DC/DC regulators such as this one belong to the MAX642 family of products. The adjusting voltage regulator's output voltage is maintain at 12V. The switching regulator operation is carried out by 8 pins. A 1.5A A maximum output current is required to meet the switching regulator operation requirements. By using the 18V Switch's maximal output voltage, adjusting voltage regulator can operate easily. An input voltage of 16.5V is used to operate this harley voltage regulator.
MAX642ACPA+ Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
Operating supply voltage of 16.5V
MAX642ACPA+ Applications
There are a lot of Maxim Integrated MAX642ACPA+ Voltage Regulators applications.
- Television equipment
- Arc suppression circuits
- Special machining machine tools
- Flexible manufacturing cells
- Grinders
- Radio equipment
- Electric heating, lighting
- Current source circuits
- Lathes
- Servo drive system
