MAX6439UTDHWD3+T
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 6 |
| Power Supplies | 1.2/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Power Dissipation-Max | 695mW |
| Adjustable Threshold | NO |
| Min Reset Threshold Voltage | 3.315V |
| Max Reset Threshold Voltage | 3.485V |
| Height Seated (Max) | 1.45mm |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Pbfree Code | yes |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
MAX6439UTDHWD3+T Overview
For package SOT-23-6, it is appropriate. This device uses an analog integrated circuit (IC) called POWER SUPPLY SUPPORT CIRCUIT. As of right 2w, there are 2 channels available. In total, it has 6 pins. Mount this part using Surface Mount. The voltage supply for this part should not be less than 1V volts. The electrical component belongs to the Power Management Circuits family. This chip's supplied voltage should not exceed 5.5V volts. You cannot activate this device if it is less than -40°C. Temperatures below 85°C are recommended for its use. There is a 1.2/5V volt power source. In total, 6 pins can be found on it. A device's minimum reset threshold voltage should be less than 3.485V. There should be a minimum reset threshold voltage over 3.315V on the device.
MAX6439UTDHWD3+T Features
Available in SOT-23-6 Package
with 6 Pins
The Min Reset Threshold Voltage at 3.315V
MAX6439UTDHWD3+T Applications
There are a lot of Maxim Integrated MAX6439UTDHWD3+T Battery Management ICs applications.
- Motor drive - 3 phase AC400V inverter
- Hybrid electric vehicles
- Refrigerator
- Rear light with dynamic control
- Body ECU
- Robots
- Consumer electronics
- Tower communications
- Chargers 50 kW to 350 kW
- Infotainment/cluster
