MAX6439UTEGWD3+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Pbfree Code | yes |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 6 |
| Power Supplies | 1.2/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Power Dissipation-Max | 695mW |
| Adjustable Threshold | NO |
| Min Reset Threshold Voltage | 3.218V |
| Max Reset Threshold Voltage | 3.383V |
| Height Seated (Max) | 1.45mm |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MAX6439UTEGWD3+T Overview
A SOT-23-6 package would be appropriate for this. This device uses an analog integrated circuit (IC) called POWER SUPPLY SUPPORT CIRCUIT. The available channels are 2. In total, it has 6 pins. To mount this part, use Surface Mount. The minimum supply voltage for this part should not be less than 1V volts. In this case, it's a Power Management Circuits family component. Supply voltage shouldn't exceed 5.5V volts for this chip. This device cannot be activated with a value less than -40°C. Temperatures below 85°C are recommended for its use. There is a 1.2/5V volt power source. The device has a total of 6 pins. Devices should have a minimum reset threshold voltage of 3.383V. There should be a voltage above 3.218V for the device's reset threshold.
MAX6439UTEGWD3+T Features
Available in SOT-23-6 Package
with 6 Pins
The Min Reset Threshold Voltage at 3.218V
MAX6439UTEGWD3+T Applications
There are a lot of Maxim Integrated MAX6439UTEGWD3+T Battery Management ICs applications.
- Center information display (CID)
- Service robotics
- Motor drive - 3 phase AC400V inverter
- ADAS sonar
- Industrial AC/DC converter
- ADAS radar
- Main inverter
- Hybrid electric vehicles
- Distributed energy resources
- Rear light with dynamic control
