MAX6439UTFJYD7+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Pbfree Code | yes |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 6 |
| Power Supplies | 1.2/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Power Dissipation-Max | 695mW |
| Adjustable Threshold | NO |
| Min Reset Threshold Voltage | 3.51V |
| Max Reset Threshold Voltage | 3.69V |
| Height Seated (Max) | 1.45mm |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MAX6439UTFJYD7+T Overview
For the SOT-23-6 package, it is appropriate. This device uses an analog IC called POWER SUPPLY SUPPORT CIRCUIT. As of right 2w, there are 2 channels available. The total number of pins is 6. Mount this part using Surface Mount. The minimum supply voltage for this part should not be less than 1V volts. Power Management Circuits is a family of electrical components. 5.5V voltage greater than 5.5V volts should be supplied to this chip. You cannot activate this device if it is less than -40°C. It should be used at temperatures below 85°C. The battery is powered by a volt of 1.2/5V. The pins on it total 6. The minimum reset threshold voltage of the device should under 3.69V. A device's minimum reset threshold voltage should be higher than 3.51V.
MAX6439UTFJYD7+T Features
Available in SOT-23-6 Package
with 6 Pins
The Min Reset Threshold Voltage at 3.51V
MAX6439UTFJYD7+T Applications
There are a lot of Maxim Integrated MAX6439UTFJYD7+T Battery Management ICs applications.
- Body ECU
- Chargers 30 kW to 150 kW
- Server secondary power (board)
- Head up display (HUD)
- Estimating the battery’s operational state
- Ventilator
- Internet infrastructure equipment
- On-board battery charger
- Base station RRH
- Buses
