MAX6439UTMRWD3+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Pbfree Code | yes |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 6 |
| Power Supplies | 1.2/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Power Dissipation-Max | 695mW |
| Adjustable Threshold | NO |
| Min Reset Threshold Voltage | 2.34V |
| Max Reset Threshold Voltage | 2.46V |
| Height Seated (Max) | 1.45mm |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MAX6439UTMRWD3+T Overview
This package corresponds to SOT-23-6. A device like this uses an analog IC named POWER SUPPLY SUPPORT CIRCUIT. As of right 2w, there are 2 channels available. 6 pins are on it. The part must be mounted with Surface Mount. This part's minimum supply voltage should not be less than 1V volts. The Power Management Circuits family of electrical components includes this component. There should be 5.5V voltage over 5.5V volts on the supply to this chip. It should not be less than -40°C in order to activate this device. Temperatures below 85°C are recommended. A 1.2/5V volt supply powers it. It has 6 pins in total. Ideally, the device should have a reset threshold voltage below 2.46V. It is important that the device's reset threshold voltage is above 2.34V.
MAX6439UTMRWD3+T Features
Available in SOT-23-6 Package
with 6 Pins
The Min Reset Threshold Voltage at 2.34V
MAX6439UTMRWD3+T Applications
There are a lot of Maxim Integrated MAX6439UTMRWD3+T Battery Management ICs applications.
- TFT cluster
- xEV charging station (off-board charger)
- Accessory drives
- Electric train traction batteries
- Submarines
- Electric cars
- On-board battery charger
- Motor bikes
- Grid power infrastructure
- Non-road type vehicles
