MAX6440UTAGYD3+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Pbfree Code | yes |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 6 |
| Power Supplies | 1.2/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Power Dissipation-Max | 695mW |
| Adjustable Threshold | NO |
| Min Reset Threshold Voltage | 3.218V |
| Max Reset Threshold Voltage | 3.383V |
| Height Seated (Max) | 1.45mm |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MAX6440UTAGYD3+T Overview
For the SOT-23-6 package, it is appropriate. The analog IC in this device is POWER SUPPLY SUPPORT CIRCUIT. There are currently 2 channels available. Total pins are 6. To mount this component, use Surface Mount. It is recommended that this part's minimum supply voltage not be less than 1V volts. Electrical components in the Power Management Circuits family are found here. Supply voltage shouldn't exceed 5.5V volts for this chip. It should not be less than -40°C in order to activate this device. A temperature below 85°C is suggested for use. The battery is powered by a volt of 1.2/5V. The device has a total of 6 pins. Devices should have a minimum reset threshold voltage under 3.383V. It is recommended that the device's minimum reset threshold voltage exceeds 3.218V.
MAX6440UTAGYD3+T Features
Available in SOT-23-6 Package
with 6 Pins
The Min Reset Threshold Voltage at 3.218V
MAX6440UTAGYD3+T Applications
There are a lot of Maxim Integrated MAX6440UTAGYD3+T Battery Management ICs applications.
- Golf carts
- Rear light with dynamic control
- Weather stations
- xEV charging station (off-board charger)
- Utility vehicles
- Distributed energy resources
- Motor drive - 3 phase AC400V inverter
- Medical & healthcare
- LED lighting
- Power supplies
