MAX6440UTEHYD7+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Pbfree Code | yes |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | 2.188 RESET THESHOLD VOLTAGE; BATTERY HTH AND LTH ARE 3.4V AND 3.0V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 6 |
| Power Supplies | 1.2/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Power Dissipation-Max | 695mW |
| Adjustable Threshold | NO |
| Min Reset Threshold Voltage | 3.315V |
| Max Reset Threshold Voltage | 3.485V |
| Height Seated (Max) | 1.45mm |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MAX6440UTEHYD7+T Overview
SOT-23-6 is the appropriate package for it. This device uses an analog integrated circuit (IC) called POWER SUPPLY SUPPORT CIRCUIT. The number of channels available is 2. Total pins are 6. The part must be mounted with Surface Mount. A voltage of at least 1V volts is required on this part. In this case, it's a Power Management Circuits family component. Its supply voltage should not exceed 5.5V volts. A value of -40°C is required to activate this device. Temperatures below 85°C are recommended. There is a 1.2/5V volt power source. In total, 6 pins can be found on it. This device can be found to have 2.188 RESET THESHOLD VOLTAGE; BATTERY HTH AND LTH ARE 3.4V AND 3.0V. There should be a voltage below 3.485V as the minimum reset threshold voltage for the device. A device's minimum reset threshold voltage should be higher than 3.315V.
MAX6440UTEHYD7+T Features
Available in SOT-23-6 Package
with 6 Pins
The Min Reset Threshold Voltage at 3.315V
MAX6440UTEHYD7+T Applications
There are a lot of Maxim Integrated MAX6440UTEHYD7+T Battery Management ICs applications.
- Grid support
- Providing battery protection
- Accessory drives
- Power supplies
- Body ECU
- Wearables
- On-board battery charger
- Leisure
- xEV charging station (off-board charger)
- Consumer electronics
