MAX6440UTEJYD3+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOT-23 |
| Number of Pins | 6 |
| Pbfree Code | yes |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 6 |
| Power Supplies | 1.2/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Power Dissipation-Max | 695mW |
| Adjustable Threshold | NO |
| Min Reset Threshold Voltage | 3.51V |
| Max Reset Threshold Voltage | 3.69V |
| Height Seated (Max) | 1.45mm |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MAX6440UTEJYD3+T Overview
It belongs to package SOT-23. IC POWER SUPPLY SUPPORT CIRCUIT is the device's analog IC. There are currently 2 channels available. 6 pins are attached to it. You can mount this part by using Surface Mount. In order for this part to operate properly, its supply voltage must not be lower than 1V volts. Power Management Circuits is the family name of this electrical component. There should be 5.5V voltage over 5.5V volts on the supply to this chip. This device must be activated by a value of -40°C. Temperatures below 85°C are recommended. It is powered by a 1.2/5V volts. 6 pins are present on it. It is recommended that the device's reset threshold voltage be below 3.69V. A device's minimum reset threshold voltage should be higher than 3.51V.
MAX6440UTEJYD3+T Features
Available in SOT-23 Package
with 6 Pins
The Min Reset Threshold Voltage at 3.51V
MAX6440UTEJYD3+T Applications
There are a lot of Maxim Integrated MAX6440UTEJYD3+T Battery Management ICs applications.
- Center information display (CID)
- Peak shaving
- ADAS ECU
- Electric train traction batteries
- Consumer electronics
- Rear light with dynamic control
- Solar and wind-generating plants
- PV inverter
- Electrical management protection
- Wearables
