MAX6440UTFJTD3+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Pbfree Code | yes |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 6 |
| Power Supplies | 1.2/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Power Dissipation-Max | 695mW |
| Adjustable Threshold | NO |
| Min Reset Threshold Voltage | 3.51V |
| Max Reset Threshold Voltage | 3.69V |
| Height Seated (Max) | 1.45mm |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MAX6440UTFJTD3+T Overview
A SOT-23-6 package would be appropriate for this. The analog IC in this device is POWER SUPPLY SUPPORT CIRCUIT. We have 2 channels available. Total pins are 6. To mount this component, use Surface Mount. It is recommended that this part's minimum supply voltage not be less than 1V volts. Power Management Circuits is a family of electrical components. It is recommended that the chip's supply voltage is 5.5V higher than 5.5V volts. You cannot activate this device if it is less than -40°C. A temperature below 85°C is recommended for its use. There is a 1.2/5V volt power source. There are a total of 6 pins on it. Devices should have a minimum reset threshold voltage under 3.69V. There should be a voltage above 3.51V for the device's reset threshold.
MAX6440UTFJTD3+T Features
Available in SOT-23-6 Package
with 6 Pins
The Min Reset Threshold Voltage at 3.51V
MAX6440UTFJTD3+T Applications
There are a lot of Maxim Integrated MAX6440UTFJTD3+T Battery Management ICs applications.
- Electric street sweepers
- Motor drive - 3 phase AC100V-240V AC servo
- Rear light with dynamic control
- Estimating the battery’s operational state
- Monitoring the battery
- Passenger cars
- Providing battery protection
- LED lighting
- ADAS radar
- Submarines
