MAX6440UTMQWD3+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Pbfree Code | yes |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 6 |
| Power Supplies | 1.2/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Power Dissipation-Max | 695mW |
| Adjustable Threshold | NO |
| Min Reset Threshold Voltage | 2.243V |
| Max Reset Threshold Voltage | 2.358V |
| Height Seated (Max) | 1.45mm |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MAX6440UTMQWD3+T Overview
The SOT-23-6 package is suitable for it. POWER SUPPLY SUPPORT CIRCUIT is the analog IC that this device employs. Channels available are 2. 6 pins are present on it. To mount this part, use Surface Mount. In order for this part to operate properly, its supply voltage must not be lower than 1V volts. An electrical component in this family is a Power Management Circuits. It is recommended that the chip's supply voltage not exceed 5.5V volts. You cannot activate this device if it is less than -40°C. Temperatures less than 85°C degrees Celsius are recommended for use. It is powered by a 1.2/5V volts. 6 pins are present on it. Devices should have a minimum reset threshold voltage of 2.358V. Devices should have a reset threshold voltage above 2.243V.
MAX6440UTMQWD3+T Features
Available in SOT-23-6 Package
with 6 Pins
The Min Reset Threshold Voltage at 2.243V
MAX6440UTMQWD3+T Applications
There are a lot of Maxim Integrated MAX6440UTMQWD3+T Battery Management ICs applications.
- ADAS Lidar
- Golf cars
- Chargers 30 kW to 150 kW
- Consumer electronics
- Motor drive - 3 phase AC100V-240V AC servo
- Garbage compressors
- ADAS ECU
- Buses
- Front light
- Golf carts
