MAX6440UTMSTD3+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Pbfree Code | yes |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | 3.075 RESET THESHOLD VOLTAGE; BATTERY HTH AND LTH ARE 2.5V AND 1.8V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 6 |
| Power Supplies | 1.2/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Power Dissipation-Max | 695mW |
| Adjustable Threshold | NO |
| Min Reset Threshold Voltage | 2.438V |
| Max Reset Threshold Voltage | 2.563V |
| Height Seated (Max) | 1.45mm |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MAX6440UTMSTD3+T Overview
A SOT-23-6 package would be appropriate for this. This device uses an analog IC called POWER SUPPLY SUPPORT CIRCUIT. As of right 2w, there are 2 channels available. Currently, there are 6 pins on it. Use Surface Mount to mount this part. It is recommended that this part's minimum supply voltage not be less than 1V volts. An electrical component of the type Power Management Circuits can be found here. 5.5V voltage greater than 5.5V volts should be supplied to this chip. It must be greater than -40°C to activate this device. The product should be used below 85°C degrees Celsius. It is powered by a 1.2/5V volts. In total, 6 pins can be found on it. In this device, 3.075 RESET THESHOLD VOLTAGE; BATTERY HTH AND LTH ARE 2.5V AND 1.8V can be detected. Devices should have a minimum reset threshold voltage of 2.563V. It is important that the device's reset threshold voltage is above 2.438V.
MAX6440UTMSTD3+T Features
Available in SOT-23-6 Package
with 6 Pins
The Min Reset Threshold Voltage at 2.438V
MAX6440UTMSTD3+T Applications
There are a lot of Maxim Integrated MAX6440UTMSTD3+T Battery Management ICs applications.
- Power supplies
- Lifts and cranes
- Motor drive - 3 phase AC100V-240V AC servo
- Motor bikes
- Power tools
- Server secondary power (board)
- Motor drive - single phase AC100V-240V non -isolated
- Park and garden
- Weather stations
- Solar and wind-generating plants
