MAX6440UTMTTD3+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Pbfree Code | yes |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 6 |
| Power Supplies | 1.2/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Power Dissipation-Max | 695mW |
| Adjustable Threshold | NO |
| Min Reset Threshold Voltage | 2.535V |
| Max Reset Threshold Voltage | 2.665V |
| Height Seated (Max) | 1.45mm |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MAX6440UTMTTD3+T Overview
It is appropriate for the SOT-23-6 package. The analog IC that this device utilizes is POWER SUPPLY SUPPORT CIRCUIT. A total of 2 channels are available. Total pins are 6. It is recommended that you mount this part using Surface Mount. The minimum supply voltage for this part should not be less than 1V volts. The electrical component belongs to the Power Management Circuits family. It is recommended that the chip's supply voltage is 5.5V higher than 5.5V volts. To activate this device, it should not be less than -40°C. Temperatures less than 85°C degrees Celsius are recommended for use. A 1.2/5V volt supply powers it. In total, 6 pins can be found on it. A device's minimum reset threshold voltage should be less than 2.665V. There should be a voltage above 2.535V for the device's reset threshold.
MAX6440UTMTTD3+T Features
Available in SOT-23-6 Package
with 6 Pins
The Min Reset Threshold Voltage at 2.535V
MAX6440UTMTTD3+T Applications
There are a lot of Maxim Integrated MAX6440UTMTTD3+T Battery Management ICs applications.
- 3-wheelers
- Electric compressor
- xEV charging station (off-board charger)
- On-board battery charger
- Front light
- Cleaning machines
- Rear light with dynamic control
- Air conditioner
- Refrigerator
- Submarines
