MAX6440UTPTWD3+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Pbfree Code | yes |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 6 |
| Power Supplies | 1.2/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Power Dissipation-Max | 695mW |
| Adjustable Threshold | NO |
| Min Reset Threshold Voltage | 2.535V |
| Max Reset Threshold Voltage | 2.665V |
| Height Seated (Max) | 1.45mm |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MAX6440UTPTWD3+T Overview
It is appropriate for the SOT-23-6 package. POWER SUPPLY SUPPORT CIRCUIT is the analog IC used by this device. The available channels are 2. In total, it has 6 pins. To mount this component, use Surface Mount. There should be a minimum supply voltage of 1V volts for this part. An electrical component in this family is a Power Management Circuits. This chip's supplied voltage should not exceed 5.5V volts. If you want to activate this device, it must be at least -40°C. Temperatures less than 85°C degrees Celsius are recommended for use. The battery is powered by a volt of 1.2/5V. It has a total of 6 pins. Ideally, the device should have a reset threshold voltage below 2.665V. There should be a minimum reset threshold voltage over 2.535V on the device.
MAX6440UTPTWD3+T Features
Available in SOT-23-6 Package
with 6 Pins
The Min Reset Threshold Voltage at 2.535V
MAX6440UTPTWD3+T Applications
There are a lot of Maxim Integrated MAX6440UTPTWD3+T Battery Management ICs applications.
- Autonomous vehicles
- Body ECU
- Grid power infrastructure
- Motor drive - DC12V-48V industry
- On-board battery charger
- Wearables
- ADAS Lidar
- Body control module
- Lifts and cranes
- Continually optimizing battery performance
