MAX6457UKD0B+T
| Parameters | |
|---|---|
| Max Supply Voltage | 28V |
| Min Supply Voltage | 4V |
| Operating Supply Current | 6.5μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 50μs Typical |
| Min Reset Threshold Voltage | 1.111V |
| Max Reset Threshold Voltage | 1.194V |
| Threshold Voltage | +1.228V |
| Undervoltage Threshold | 1.111V |
| Overvoltage Threshold | 1.194V |
| Length | 2.9mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 571mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX6457 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Number of Channels | 1 |
MAX6457UKD0B+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. A Tape & Reel (TR) package is used to package the power management. Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 1 channels. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 1 is used to conduct the PMIC chip. Power management is included in the Surface Mount mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. There are a total of 5 pins on power management. Pin count of the power management is 5. IC management can only work with a supply voltage of 4V volts. The supply voltage (Vsup) should not exceed 28V volts in this IC power. A Surface Mount mounting type is recommended. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. The power management's supply current is 6.5μA. Additionally, there are many other features that can be found inside of the power management, such as [0]. To find similar IC managements from the manufacturer, you can always search by MAX6457.
MAX6457UKD0B+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4V
6.5μA operating supply current
MAX6457UKD0B+T Applications
There are a lot of Maxim Integrated MAX6457UKD0B+T Voltage Supervisors applications.
- Power distribution systems of operating room
- External alarm
- Functional modules
- Digitally controlled LDO regulators circuit
- Computer applications
- Important electronics for automotive safety
- Smart meter
- Solar power charger
- Power distribution systems of infant care room
- Satellite navigation
