MAX6458UKD3C+T
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 571mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX6458 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 28V |
| Min Supply Voltage | 4V |
| Operating Supply Current | 6.5μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 90ms Minimum |
| Min Reset Threshold Voltage | 1.071V |
| Max Reset Threshold Voltage | 1.151V |
| Threshold Voltage | +1.228V |
| Undervoltage Threshold | 1.071V |
| Overvoltage Threshold | 1.151V |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
MAX6458UKD3C+T Overview
It is mounted through 5 terminals on the power management. Tape & Reel (TR)-packaging is used. As a reference, this IC management includes 1 functions for your convenience. There are 1 channels available on this supervisor, and each channel has a different function. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. When 1 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. It is possible to subcategorize this power ic as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 5. This power management system has 5 pins. A voltage (Vsup) that doesn't fall below 4V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. This IC power should be powered by no more than 28V volts of supply voltage (Vsup). The mounting type of the supervisors is Surface MountIt is recommended that the supervisor be set to this temperature: -40°C~125°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. In order to maintain a stable supply current for the power management, 6.5μA is the recommended value. Additionally, IC management are a variety of features, for example [0], to name a few. You can always use MAX6458, the base supervisor number, to search for similar PMICs of the manufacturer.
MAX6458UKD3C+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4V
6.5μA operating supply current
MAX6458UKD3C+T Applications
There are a lot of Maxim Integrated MAX6458UKD3C+T Voltage Supervisors applications.
- Data storage applications
- Electronics installed in the vehicle
- Detection of phase loss
- DC stabilized power supply module
- Dash board
- Stable power system
- Leakage current detection
- Cloud computing
- Medical-specific insulation monitor
- DVR
