MAX6461UR22+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOT-23 |
| Number of Pins | 3 |
| Packaging | Strip |
| Published | 2006 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset, Voltage Detector |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 320mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.95mm |
| Pin Count | 3 |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 3.5μA |
| Max Supply Current | 3.5μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 14 μs |
| Min Reset Threshold Voltage | 2.167V |
| Max Reset Threshold Voltage | 2.233V |
| Threshold Voltage | 2.2V |
| Undervoltage Threshold | 2.167V |
| Overvoltage Threshold | 2.233V |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6461UR22+T Overview
A total of 3 terminals are used to mount this power management. In terms of packaging, power management follows the Strip model. In this IC power you will find 1 functions for you to refer to. There are 1 channels on this power managment ic that can be found in a series. There are SOT-23 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset, Voltage Detector products. IC management conducts in a 3.6V-voltage supply. When 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. The total number of pins on this power management is 3. There are 3 pins on the power managment ic. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. Voltage (Vsup) shouldn't exceed 6V volts in this PMIC. In order to maintain a stable supply current for the power management, 3.5μA is the recommended value. A maximum supply temperature of 3.5μA can be used with this power management.
MAX6461UR22+T Features
Simple Reset/Power-On Reset, Voltage Detector type
Minimum supply voltage of 1V
3.5μA operating supply current
MAX6461UR22+T Applications
There are a lot of Maxim Integrated MAX6461UR22+T Voltage Supervisors applications.
- Electronics installed in the vehicle
- Functional modules
- emergency room
- Radar
- Efficient information transmission
- Military communications
- Electrical fire monitoring system
- Set top box
- Fire equipment power monitoring system
- Computer applications
