MAX6466UK26+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOT-23 |
| Number of Pins | 5 |
| Packaging | Strip |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 571mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Pin Count | 5 |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 3.5μA |
| Max Supply Current | 3.5μA |
| Adjustable Threshold | NO |
| Accuracy | 2.5 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Reset Timeout | 150 ms |
| Min Reset Threshold Voltage | 2.561V |
| Max Reset Threshold Voltage | 2.639V |
| Threshold Voltage | 2.6V |
| Undervoltage Threshold | 2.561V |
| Overvoltage Threshold | 2.639V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 260 ms |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6466UK26+T Overview
Power management is mounted through 5 terminals. There is a Strip-packaging method applied to IC management. In this IC power you will find 1 functions for you to refer to. A series of 1 channels can be found on this supervisor. In this IC management you will find SOT-23 functions for you to refer to. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. The package peak reflow temperature is specified to be 260. IC management conducts at a voltage of 3.6V. Surface Mount is the one that mounts power management. 5 pins are present in total in this power management. 5 pins make up the power management. IC management can only work with a supply voltage of 1.2V volts. There should be no more than 6V volts of maximum supply voltage (Vsup) in this power management. It is estimated that the voltage supervisor's supply current is 3.5μA. The power management can work with a maximum supply temperature of 3.5μA. On the power management, 1 inputs are monitored.
MAX6466UK26+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
3.5μA operating supply current
MAX6466UK26+T Applications
There are a lot of Maxim Integrated MAX6466UK26+T Voltage Supervisors applications.
- Smart meter
- Satellite navigation
- External alarm
- Utility meter
- Detection of phase sequence
- Medical-specific isolation transformer
- Power communication system
- Battery cars
- Computer applications
- Battery-powered equipment
