MAX6466XR16+T
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 228.6mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX6466 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 3.5μA |
| Max Supply Current | 3.5μA |
| Adjustable Threshold | NO |
| Accuracy | 2.5 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.6V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Min Reset Threshold Voltage | 1.576V |
| Max Reset Threshold Voltage | 1.624V |
| Threshold Voltage | +1.6V |
| Undervoltage Threshold | 1.647V |
| Overvoltage Threshold | 1.697V |
| Reset Delay Time | 260 ms |
| Length | 2mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-70, SOT-323 |
| Number of Pins | 3 |
| Weight | 6.208546mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
MAX6466XR16+T Overview
There are 3 mounting terminals on the voltage supervisor, each of which has a different function. Packaging is in the form of a Tape & Reel (TR). Power management is possible to find a series of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. In this IC management you will find SC-70, SOT-323 functions for you to refer to. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. The supervisor is always powered by a 5V volt supply. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts power management on the wall. There is a subcategory called Power Management Circuits for this power management. In total, it has 3 pins on IC management. 3 pins are on the supervisor. Supply voltage (Vsup) should be at least 1V for this power management. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 6V volts. A Surface Mount mounting type is recommended. This range of temperature should be set for the supervisors: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 3.5μA is the recommended value. It is always advisable to use MAX6466, the base supervisor number, when searching for similar PMICs from the manufacturer. At the most, voltage supervisor can work with a supply temperature of 3.5μA.
MAX6466XR16+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
3.5μA operating supply current
MAX6466XR16+T Applications
There are a lot of Maxim Integrated MAX6466XR16+T Voltage Supervisors applications.
- WiFi router
- Data storage applications
- Electric heating appliances
- Insulation fault location system
- Transformer load monitoring equipment
- Microcontroller system
- Military electronics
- Embedded computing
- Smartphones
- Urban rail transit weak current power monitoring
