MAX660EPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 930.006106mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Analog ICs |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX660 |
| Function | Ratiometric |
| Number of Outputs | 1 |
| Output Voltage | 11V |
| Output Type | Fixed |
| Max Output Current | 100mA |
| Input Voltage-Nom | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.5V |
| Analog IC - Other Type | SWITCHED CAPACITOR CONVERTER |
| Operating Supply Current | 1mA |
| Output Configuration | Positive or Negative |
| Max Output Voltage | -1.5V |
| Voltage - Output (Min/Fixed) | -Vin 2Vin |
| Topology | Charge Pump |
| Logic Function | Inverting |
| Frequency - Switching | 10kHz 80kHz |
| Supply Current-Max (Isup) | 3mA |
| Synchronous Rectifier | No |
| Min Output Voltage | -5.5V |
| Switcher Configuration | DOUBLER INVERTER |
| Height | 4.572mm |
| Length | 4.45mm |
| Width | 7.87mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX660EPA+ Overview
It uses the Tube package in order to optimize the performance of this voltage regulator. A voltage regulator consists of 8 terminations. There is one type of analog IC that this voltage regulator is equipped with, and that is the SWITCHED CAPACITOR CONVERTER type. In order to save space, this harley voltage regulator is available in the 8-DIP (0.300, 7.62mm) package. The voltage regulator 12v has 1 outputs. As you can see, this DC DC switching regulator generates Fixed output on its output pins. As the name implies, this voltage regulator 12v is designed for mounting on a Through Hole bracket. Voltage regulators should be operated at -40°C~85°C TA temperature while operating. In this voltage regulator 12v, the switching frequency is 10kHz 80kHz. As a result, the output voltage of the voltage regulator 12v (Min/Fixed) is -Vin 2Vin. 260 is essentially indestructible due to DC DC switching regulator's peak reflow temperature. In order to meet the operation requirements,voltage regulator is designed to provide a nominal input voltage of 5V. A voltage regulator 12v such as this falls under the Other Analog ICs category and belongs to this category. There is a DC/DC regulator in this family that belongs to the MAX660 family. There is a possibility that DC DC switching regulator can give voltage at 11V volts. There are 8 pins that are used for the operation of the voltage regulator 12v. As a general rule, this voltage regulator 12v should keep its output voltage at least at -5.5V. Accordingly, dc to dc voltage regulator's maximum output current is 100mA A. The maximum output voltage of this regulator voltage is -1.5V. In order to ensure reliable performance, the dc to dc voltage regulator's minimum supply voltage is 1.5V volts. A maximum supply voltage of 5.5V is required for adjusting voltage regulator to operate. DC-DC switching regulator operating on 1mA supply voltage.
MAX660EPA+ Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
MAX660EPA+ Applications
There are a lot of Maxim Integrated MAX660EPA+ Voltage Regulators applications.
- Large fire protection systems
- Milling machines
- Imported equipment
- Electrical power transmission
- Packaging
- Special machining machine tools
- Flexible manufacturing cells
- Access control systems
- Product burn-in
- Laboratories
