MAX669EUB+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX669 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 28V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 28V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 220μA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 1.8V~28V |
| Control Features | Enable, Frequency Control |
| Topology | Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz~500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 575kHz |
| Max Duty Cycle | 94 % |
| Duty Cycle (Max) | 90% |
| Clock Sync | Yes |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX669EUB+T Overview
With a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller is suitable for a wide range of applications. For outputs of 1, this dc motor controller is suitable. PMIC is packaged in a solid enclosure of Tape & Reel (TR). It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control has a supply voltage and operating voltage of 1.8V~28V. A -40°C~85°C TA dc switcher is not a problem. A switching controller such as this can switch at a value of 100kHz~500kHz . dc dc regulator is made easier with Surface Mount. DCDC regulator is controlled efficiently by Enable, Frequency Control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . 10 terminations with various dc switching's functions. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's voltage input is 5V. Other relevant dc to dc converter ics will be returned if you search "MAX669". Total pins of switching converter are 10. Specially, switching converter corresponds to type Switching Regulator or Controllers. Statistically, the DC regulator outputs 28V voltage. In most cases, the dc dc regulator's output current is 1A. This information should be noted when you begin working with the component. The duty cycle of the voltage regulator dc to dc can be set to 94 % on power-up or power-down to ensure reliability. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. There is a maximum frequency of 575kHz on this dc regulators. To operate the voltage regulator dc to dc safely and reliably, users should apply 28V. There is 220μA supply current for it.
MAX669EUB+T Features
Transistor Driver Outputs
Switching Frequency: 100kHz~500kHz
Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 94 %
MAX669EUB+T Applications
There are a lot of Maxim Integrated MAX669EUB+T DC to DC converter applications.
- Computer-related products
- SMT equipment
- Domestic water pumps
- Experimental setup
- Hydro power
- Servo drive system
- Computer monitoring equipment of building
- Electric heating, lighting
- Cutting machine tools
- Wide-range voltage regulation circuits
