MAX6705ASKA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOT-23 |
| Number of Pins | 8 |
| Packaging | Strip |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 714mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Pin Count | 8 |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 12μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 140 ms |
| Min Reset Threshold Voltage | 2.85V |
| Max Reset Threshold Voltage | 3V |
| Threshold Voltage | 2.93V |
| Undervoltage Threshold | 2.85V |
| Overvoltage Threshold | 3V |
| Height Seated (Max) | 1.45mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6705ASKA+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Packaging is in the form of a Strip. In this PMIC, you can find 1 functions for your reference. This power management is made up of 1 channels which are available in a series format. In this IC management you will find SOT-23 functions for you to refer to. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. Power management conducts at a voltage of 2. The power management is mounted by Surface Mount. There are a total of 8 pins on power management. 8 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.2V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. As far as the supply current of the power management is concerned, it is 12μA.
MAX6705ASKA+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1.2V
12μA operating supply current
MAX6705ASKA+T Applications
There are a lot of Maxim Integrated MAX6705ASKA+T Voltage Supervisors applications.
- Microprocessor system
- Power distribution systems of infant care room
- Analog circuit
- Household appliances
- Detection of phase sequence
- Consumer electronics
- Microcontroller system
- Transformer load monitoring equipment
- Battery-powered equipment
- Leakage current detection
