MAX6706LKA+T
| Parameters | |
|---|---|
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX6706 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 12μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High |
| Voltage - Threshold | 4.63V Adj |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height Seated (Max) | 1.45mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 714mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
MAX6706LKA+T Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Packaging is in the form of a Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. Depending on the power managment ic you are looking at, you can find a total of 1 channels. There are SOT-23-8 functions included in this PMIC so that you can refer to them. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. In a 5V supply voltage, the power management conducts. Power management conducts at a voltage of 2. The mount is provided by Surface Mount. The power management belongs to the Power Management Circuits subcategory. Taking into account all of the pins, this power management has a total of 8. This power management has 8 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.2V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~125°C TA degrees. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. There is a supply current of 12μA for the power management. To find similar IC managements from the manufacturer, you can always search by MAX6706. To be able to work, this power management requires 5V volts of power.
MAX6706LKA+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1.2V
12μA operating supply current
MAX6706LKA+T Applications
There are a lot of Maxim Integrated MAX6706LKA+T Voltage Supervisors applications.
- Consumer electronics
- Power communication system
- Detection of phase sequence
- Power distribution systems of infant care room
- Multi-voltage system
- Dash board
- Smartphones
- Battery-powered equipment
- Efficient information transmission
- Data storage applications
