MAX6709KUB+
| Parameters | |
|---|---|
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 444mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX6709 |
| Output | Open Drain or Open Collector |
| Pin Count | 10 |
| Power Supplies | 2.5/5V |
| Number of Channels | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 35μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.58V 2.93V Adj Adj |
| Number of Voltages Monitored | 4 |
| Reset Timeout | <1ms Minimum |
| Supply Current-Max (Isup) | 0.065mA |
| Undervoltage Threshold | 1.53V |
| Overvoltage Threshold | 1.62V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
MAX6709KUB+ Overview
This voltage supervisor has a total of 10 mounting terminals that can be used for mounting. It is packaged with Tube. Power management is possible to find a series of 1 functions. There are 4 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. Packages are specified to have an average peak reflow temperature of 260. A supply voltage of 5V is used to conduct the PMIC chip. A supply voltage of 4 is used to conduct the PMIC chip. The power management is mounted by a Surface Mount-axis. The power management belongs to the Power Management Circuits subcategory. The total number of pins on this power management is 10. This power management system has 10 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 2V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. The power management's supply current is 35μA. For similar manage ics search of the manufacturer, you can always refer to MAX6709, the base PMIC number. There is a requirement for 2.5/5V power to power this power management.
MAX6709KUB+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2V
35μA operating supply current
MAX6709KUB+ Applications
There are a lot of Maxim Integrated MAX6709KUB+ Voltage Supervisors applications.
- FPGA design
- Leakage current detection
- Microprocessor system
- Sensitive sensors
- Radio
- Dash board
- Digitally controlled LDO regulators circuit
- Kitchen appliances
- Radar
- Battery-powered equipment
