MAX6709NUB+
| Parameters | |
|---|---|
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX6709 |
| Output | Open Drain or Open Collector |
| Pin Count | 10 |
| Power Supplies | 2.5/5V |
| Number of Channels | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 35μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.78V Adj Adj Adj |
| Number of Voltages Monitored | 4 |
| Reset Timeout | <1ms Minimum |
| Supply Current-Max (Isup) | 0.065mA |
| Undervoltage Threshold | 2.7V |
| Overvoltage Threshold | 2.85V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 444mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
MAX6709NUB+ Overview
As you can see, this power management is mounted through 10 terminals. There is a Tube-packaging method applied to IC management. The purpose of this IC management is to provide you with a reference of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 4 channels. There are 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions included in this PMIC so that you can refer to them. As with other Multi-Voltage Supervisor products, this IC management also offers a wide range of benefits. IC management is specified that the package peak reflow temperature should be 260. In a 5V supply voltage, the power management conducts. IC management is possible to find a succession of 4 voltages that have been checked. Power management is included in the Surface Mount mount. Power Management Circuits is a subcategory of this PMIC chip. Power management has a total of 10 pins. 10 pins make up the power management. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 2V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The mounting type of the supervisors is Surface MountThis power management is the recommended temperature range for the supervisors: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. There is a 35μA supply current present in the power management. It is always advisable to use MAX6709, the base supervisor number, when searching for similar PMICs from the manufacturer. This power management requires 2.5/5V power to work.
MAX6709NUB+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2V
35μA operating supply current
MAX6709NUB+ Applications
There are a lot of Maxim Integrated MAX6709NUB+ Voltage Supervisors applications.
- External alarm
- Battery cars
- Stable power system
- Detection of phase imbalance
- Telecommunications equipment
- Microprocessor system
- Power distribution systems of infant care room
- Power distribution systems of operating room
- Radio
- Utility meter
