MAX6710IUT+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Supplier Device Package | SOT-23-6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Multi-Voltage Supervisor |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 695.7mW |
| Base Part Number | MAX6710 |
| Output | Open Drain or Open Collector |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.19V 2.93V Adj Adj |
| Number of Voltages Monitored | 4 |
| Reset Timeout | 140ms Minimum |
| Undervoltage Threshold | 2.13V |
| Overvoltage Threshold | 2.25V |
| Number of Monitored Inputs | 4 |
| Reset Delay Time | 200 ms |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6710IUT+T Overview
Tape & Reel (TR)-packaging is used. Please find attached SOT-23-6 functions for your reference in this IC power. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. Power ics operate at 4 supply voltages. The mount is attached to Surface Mount. 6 pins are present on the power management system. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. A similar IC managements number of the manufacturer can always be found by using MAX6710, the base power ics number. The power management has 4 monitored inputs.
MAX6710IUT+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
MAX6710IUT+T Applications
There are a lot of Maxim Integrated MAX6710IUT+T Voltage Supervisors applications.
- Embedded computing
- Insulation fault location system
- Rechargeable batteries
- Automotive power systems
- Urban rail transit weak current power monitoring
- Unattended substation automation
- Data storage applications
- DVR
- Stable power system
- Personal computers
