MAX6710KUT+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Packaging | Strip |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 695.7mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.95mm |
| Pin Count | 6 |
| Power Supplies | 2.5/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Number of Voltages Monitored | 4 |
| Reset Timeout | 140 ms |
| Supply Current-Max (Isup) | 0.05mA |
| Threshold Voltage | 2.93V |
| Undervoltage Threshold | 1.53V |
| Overvoltage Threshold | 1.62V |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6710KUT+T Overview
It is mounted through 6 terminals on the power management. Packaged in the form of a Strip, power management is easy to use. In this PMIC, you can find 1 functions for your reference. A series of 4 channels can be found on this supervisor. The purpose of this IC power is to provide you with a reference of SOT-23-6 functions. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. A supply voltage of 2.5V is used to conduct the PMIC chip. Power ics operate at 4 supply voltages. Power management is included in the Surface Mount mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. 6 pins are present in total in this power management. This power management has 6 pins. It is recommended that Vsup should not be less than 1V for this IC power. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. To operate this power management, you will need at least 2.5/5V volts of power.
MAX6710KUT+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
MAX6710KUT+T Applications
There are a lot of Maxim Integrated MAX6710KUT+T Voltage Supervisors applications.
- Smart meter
- Microprocessor system
- Detection of phase sequence
- Detection of phase imbalance
- Efficient information transmission
- Power distribution systems of infant care room
- Power distribution systems of CCU
- Automotive power systems
- Automotive permanent magnet synchronous motors
- Embedded computing
