MAX6711LEXS+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-82A, SOT-343 |
| Number of Pins | 4 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 245mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX6711 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 4 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 16μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.06mA |
| Min Reset Threshold Voltage | 4.56V |
| Max Reset Threshold Voltage | 4.7V |
| Threshold Voltage | +4.63V |
| Undervoltage Threshold | 4.56V |
| Overvoltage Threshold | 4.7V |
| Length | 2.025mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6711LEXS+T Overview
Power management is mounted through 4 terminals. In terms of packaging, power management follows the Tape & Reel (TR) model. In this PMIC, you can find 1 functions for your reference. A series of 1 channels can be found on this supervisor. There are SC-82A, SOT-343 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. In a 5V supply voltage, the power management conducts. When 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, the power management has 4 pins in it. 4 pins make up the power management. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.2V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type for IC management is Surface Mount. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. There is a supply current of 16μA for the power management. To find similar IC managements from the manufacturer, you can always search by MAX6711. The power management must be powered by 5V volts to function properly.
MAX6711LEXS+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
16μA operating supply current
MAX6711LEXS+T Applications
There are a lot of Maxim Integrated MAX6711LEXS+T Voltage Supervisors applications.
- Solar power charger
- Microprocessor system
- Power communication system
- DC stabilized power supply module
- Efficient information transmission
- Microcontroller system
- Detection of phase sequence
- Data storage applications
- Radio
- Power distribution systems of ICU
