MAX6713MEXS+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-82A, SOT-343 |
| Number of Pins | 4 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 245mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX6713 |
| Output | Open Drain or Open Collector |
| Pin Count | 4 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 16μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.38V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.06mA |
| Min Reset Threshold Voltage | 4.31V |
| Max Reset Threshold Voltage | 4.45V |
| Threshold Voltage | +4.38V |
| Undervoltage Threshold | 4.31V |
| Overvoltage Threshold | 4.45V |
| Length | 2.025mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6713MEXS+T Overview
There are 4 mounting terminals on the voltage supervisor, each of which has a different function. In terms of packaging, power management follows the Tape & Reel (TR) model. To assist you, this IC power includes 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this IC management you will find SC-82A, SOT-343 functions for you to refer to. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. A supply voltage of 5V is used to conduct the PMIC chip. Power management conducts at a voltage of 1. The mount is provided by Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. In total, it has 4 pins on IC management. 4 pins are present on the power management system. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.2V, which is the minimum supply voltage that should be applied. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. A Surface Mount mounting type is recommended. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. There is a 16μA supply current present in the power management. To find similar IC managements from the manufacturer, you can always search by MAX6713. In order to operate this power management, it requires 5V volts of power.
MAX6713MEXS+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
16μA operating supply current
MAX6713MEXS+T Applications
There are a lot of Maxim Integrated MAX6713MEXS+T Voltage Supervisors applications.
- Radar
- FPGA design
- Sensitive sensors
- Power distribution systems of infant care room
- Power distribution systems of ICU
- Kitchen appliances
- WiFi router
- emergency room
- Power distribution systems of operating room
- Linux and server computing
