MAX6714CUB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 444mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX6714 |
| Output | Open Drain or Open Collector |
| Pin Count | 10 |
| Power Supplies | 2.5/5V |
| Number of Channels | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 80μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.93V Adj Adj Adj |
| Number of Voltages Monitored | 4 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.065mA |
| Undervoltage Threshold | 2.85V |
| Overvoltage Threshold | 3V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX6714CUB Overview
There are 10 mounting terminals on the voltage supervisor, each of which has a different function. There is a Tube-packaging method applied to IC management. In this PMIC, you can find 1 functions for your reference. This power management is made up of 4 channels which are available in a series format. To assist you, this PMIC includes 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 245 for the package during reflow. The supervisor is always powered by a 5V volt supply. A supply voltage of 4 is used to conduct the PMIC chip. By Surface Mount, IC management has been mounted. There is a subcategory called Power Management Circuits for this power management. In total, the power management has 10 pins in it. This power management system has 10 pins. IC management can only work with a supply voltage of 2V volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The mounting type of the supervisors is Surface MountThe supervisors should be set to the following temperature: -40°C~85°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. As far as the supply current of the power management is concerned, it is 80μA. For similar manage ics search of the manufacturer, you can always refer to MAX6714, the base PMIC number. In order to operate this power management, it requires 2.5/5V volts of power.
MAX6714CUB Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2V
80μA operating supply current
MAX6714CUB Applications
There are a lot of Maxim Integrated MAX6714CUB Voltage Supervisors applications.
- Medical-specific insulation monitor
- Low voltage/high power - AI, GPU
- Network equipment
- Computer applications
- Unattended substation automation
- Detection of phase imbalance
- Data storage applications
- Digitally controlled LDO regulators circuit
- Cloud computing
- Smartphones
