MAX6716AUTSVD3+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 696mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1V |
| Terminal Pitch | 0.95mm |
| Base Part Number | MAX6716A |
| Output | Push-Pull, Totem Pole |
| Pin Count | 6 |
| Power Supplies | 1/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 15μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.575V 2.925V |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.039mA |
| Undervoltage Threshold | 1.53V |
| Overvoltage Threshold | 1.62V |
| Height Seated (Max) | 1.45mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6716AUTSVD3+T Overview
This power management consists of 6 mounting terminals on which it can be mounted. It is packaged with Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. There are 2 channels on this power managment ic that can be found in a series. To assist you, this PMIC includes SOT-23-6 functions. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. IC management is specified that the package peak reflow temperature should be 260. IC management conducts at a voltage of 1V. There is a voltage supply of 2 for the PMIC chip, and the chip conducts at that voltage. Surface Mount mounts power management on the wall. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. Taking into account all of the pins, this power management has a total of 6. 6 pins are present on the power management system. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 800mV volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The recommended mounting type is Surface Mount. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. Power management has an output of Push-Pull, Totem Pole during operation. The power management's supply current is 15μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6716A, which is the base power ics number. To operate this power management, you will need at least 1/5V volts of power.
MAX6716AUTSVD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6716AUTSVD3+T Applications
There are a lot of Maxim Integrated MAX6716AUTSVD3+T Voltage Supervisors applications.
- Network equipment
- Transformer load monitoring equipment
- Data storage applications
- Urban rail transit weak current power monitoring
- Military electronics
- Important electronics for automotive safety
- WiFi router
- External alarm
- Satellite navigation
- Automotive permanent magnet synchronous motors
