MAX6716UTVHD3+T
| Parameters | |
|---|---|
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | TIN |
| Additional Feature | RESET THRESHOLD VOLTAGE ARE 1.575V AND 1.313V; MANUAL RESET INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 696mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Base Part Number | MAX6716 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 6 |
| Power Supplies | 1/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 15μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.313V 1.575V |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 140ms Minimum |
| Undervoltage Threshold | 1.275V |
| Overvoltage Threshold | 1.35V |
| Height Seated (Max) | 1.45mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
MAX6716UTVHD3+T Overview
There are 6 terminals on this power management that allow it to be mounted. Packaging is in the form of a Tape & Reel (TR). Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 2 channels that can be found. The purpose of this IC power is to provide you with a reference of SOT-23-6 functions. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. The package peak reflow temperature is specified to be 260. IC management conducts in a 2-voltage supply. Power management is included in the Surface Mount mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. Taking into account all of the pins, this power management has a total of 6. This power management has 6 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 800mV, which is the minimum supply voltage that should be applied. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. This range of temperature should be set for the supervisors: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. The supervisor's supply current is specified to 15μA. There are other features such as RESET THRESHOLD VOLTAGE ARE 1.575V AND 1.313V; MANUAL RESET INPUT to name a few. For similar manage ics search of the manufacturer, you can always refer to MAX6716, the base PMIC number. The power management must be powered by 1/5V volts to function properly.
MAX6716UTVHD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6716UTVHD3+T Applications
There are a lot of Maxim Integrated MAX6716UTVHD3+T Voltage Supervisors applications.
- WiFi router
- Embedded computing
- Medical-specific insulation monitor
- Power communication system
- Military communications
- DVR
- Electronics installed in the vehicle
- Leakage protection
- Power distribution systems of infant care room
- Transformer load monitoring equipment
