MAX6718AUKLTD3+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOT-23-5 |
| Number of Pins | 5 |
| Packaging | Strip |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | MATTE TIN |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 571mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.15V |
| Pin Count | 5 |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 15μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 140 ms |
| Supply Current-Max (Isup) | 0.039mA |
| Threshold Voltage | 4.625V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.15V |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6718AUKLTD3+T Overview
There are 5 terminals connected to this power management, which makes it easy to mount. A Strip package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 2 channels that can be found. Please refer to power management for SOT-23-5 functions. There are many benefits that this IC power shares with other Multi-Voltage Supervisor products as well. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 3.15V for the PMIC chip, and the chip conducts at that voltage. Power ics operate at 2 supply voltages. The mount is attached to Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. There are a total of 5 pins on power management. This power management system has 5 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 800mV volts. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The supervisor's supply current is specified to 15μA.
MAX6718AUKLTD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6718AUKLTD3+T Applications
There are a lot of Maxim Integrated MAX6718AUKLTD3+T Voltage Supervisors applications.
- Smartphones
- Transformer load monitoring equipment
- Automotive power systems
- Detection of phase imbalance
- Electric heating appliances
- Utility meter
- Fire equipment power monitoring system
- Efficient information transmission
- Military communications
- Rechargeable batteries
