Parameters |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Type |
Multi-Voltage Supervisor |
Terminal Finish |
Matte Tin (Sn) |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-40°C |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
571mW |
Technology |
BICMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.15V |
Pin Count |
5 |
Temperature Grade |
AUTOMOTIVE |
Number of Channels |
2 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
800mV |
Operating Supply Current |
15μA |
Adjustable Threshold |
YES |
Watchdog Timer |
No |
Reset |
Active Low |
Number of Voltages Monitored |
2 |
Reset Timeout |
140 ms |
Supply Current-Max (Isup) |
0.039mA |
Threshold Voltage |
2.925V |
Undervoltage Threshold |
765mV |
Overvoltage Threshold |
810mV |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Mount |
Surface Mount |
Package / Case |
SOT-23 |
Number of Pins |
5 |
Packaging |
Strip |
Published |
2008 |
MAX6718AUKSDD3+T Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. There is a Strip-packaging method applied to IC management. As a reference, this IC management includes 1 functions for your convenience. Power management consists of 2 channels, each of which can be used independently. In this PMIC, you can find SOT-23 functions for your reference. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. As specified in the package specification, the peak reflow temperature of the package is set at 260. In a 3.15V supply voltage, the power management conducts. During operation, the power ic is supplied with a voltage of 2. The mount is attached to Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. A total of 5 pins are located on this power management. Power managment ic pin count is 5. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 800mV. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. As far as the supply current of the power management is concerned, it is 15μA.
MAX6718AUKSDD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6718AUKSDD3+T Applications
There are a lot of Maxim Integrated MAX6718AUKSDD3+T Voltage Supervisors applications.
- Important electronics for automotive protection
- Embedded computing
- Radar
- emergency room
- Automotive permanent magnet synchronous motors
- Medical-specific isolation transformer
- Multi-voltage system
- Satellite navigation
- Digitally controlled LDO regulators circuit
- Consumer electronics